|
6V 10Ah
|
|
|
| General Specifications | ||
|---|---|---|
| Dimensions: | ||
| Length | 5.95 inches | 151 millimeters |
| Width | 2.00 inches | 51 millimeters |
| Height | 3.70 inches | 94 millimeters |
| Height over Terminals | 3.86 inches | 98 millimeters |
| Approximate Weight | 4.60 pounds | 2.09 kilograms |
| Electrical Specifications | ||
| Nominal Voltage: | 6 Volts | |
| Nominal Capacity: | ||
| 20 hour rate | (600mA to 5.25 volts) | 10.0 AH |
| 10 hour rate | (1150mA to 5.25 volts) | 9.5 AH |
| 5 hour rate | (2100mA to 5.10 volts) | 8.5 AH |
| 1 hour rate | (9000mA to 4.50 volts) | 7.0 AH |
| Energy Density (20 hour rate) | 1.64 Watt-hours/cubic inch | 99.5 Watt-hours/l |
| Specific Energy (20 hour rate) | 15.65 Watt-hours/pound | 34.45 Watt-hours/kg |
| Internal Resistance (Fully Charged Battery) | 7.2 milliohms (approx.) | |
|
|
ChargingCycle Applications: Limit initial current to 2000mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68oF (20oC). Hold at 7.20 to 7.35 volts until current drops to approximately 100mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage."Float" or "Stand-by Service": Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
|
| products list | ||
|
Design by Sam Technology Co., Ltd.
|
||