|
2V 6Ah
|
|
|
| General Specifications | ||
|---|---|---|
| Dimensions: | ||
| Length | 1.97 inches | 50 millimeters |
| Width | 1.34 inches | 34 millimeters |
| Height | 3.94 inches | 100 millimeters |
| Height over Terminals | 4.13 inches | 105 millimeters |
| Approximate Weight | 0.86 pounds | 0.39 kilograms |
| Electrical Specifications | ||
| Nominal Voltage: | 2 Volts | |
| Nominal Capacity: | ||
| 20 hour rate | (300mA to 1.75 volts) | 6.0 AH |
| 10 hour rate | (540mA to 1.75 volts) | 5.4 AH |
| 5 hour rate | (980mA to 1.70 volts) | 4.9 AH |
| 1 hour rate | (3600mA to 1.50 volts) | 3.6 AH |
| Energy Density (20 hour rate) | 1.15 Watt-hours/cubic inch | 70.6 Watt-hours/l |
| Specific Energy (20 hour rate) | 14.0 Watt-hours/pound | 30.8 Watt-hours/kg |
| Internal Resistance (Fully Charged Battery) | 5 milliohms (approx.) | |
|
|
ChargingCycle Applications: Limit initial current to 1200mA. Charge until battery voltage (under charge) reaches 2.40 to 2.50 volts at 68oF (20oC). Hold at 2.40 to 2.50 volts until current drops to approximately 60mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage."Float" or "Stand-by Service": Hold battery across constant voltage source of 2.25 to 2.30 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
|
| products list | ||
|
Design by Sam Technology Co., Ltd.
|
||