|
12V 65Ah
|
|
|
| General Specifications | ||
|---|---|---|
| Dimensions: | ||
| Length | 13.8 inches | 350 millimeters |
| Width | 6.54 inches | 166 millimeters |
| Height | 6.85 inches | 174 millimeters |
| Height over Terminals | 6.85 inches | 174 millimeters |
| Approximate Weight | 52.50 pounds | 23 kilograms |
| Electrical Specifications | ||
| Nominal Voltage: | 12 Volts | |
| Nominal Capacity: | ||
| 20 hour rate | (3.00A to 10.50 volts) | 65.0 AH |
| 10 hour rate | (5.50A to 10.50 volts) | 58.0 AH |
| 5 hour rate | (10A to 10.20 volts) | 52.0 AH |
| 1 hour rate | (35A to 9.00 volts) | 39.0 AH |
| Energy Density (20 hour rate) | 1.30 Watt-hours/cubic inch | 82 Watt-hours/l |
| Specific Energy (20 hour rate) | 12.4 Watt-hours/pound | 28 Watt-hours/kg |
| Internal Resistance (Fully Charged Battery) | 8 milliohms (approx.) | |
|
|
ChargingCycle Applications: Limit initial current to 12A. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 600mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage."Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
|
| products list | ||
|
Design by Sam Technology Co., Ltd.
|
||