|
12V 35Ah
|
|
|
| General Specifications | ||
|---|---|---|
| Dimensions: | ||
| Length | 7.80 inches | 197 millimeters |
| Width | 5.24 inches | 133 millimeters |
| Height | 6.50 inches | 165 millimeters |
| Height over Terminals | 6.89 inches | 175 millimeters |
| Approximate Weight | 22.93 pounds | 10.4 kilograms |
| Electrical Specifications | ||
| Nominal Voltage: | 12 Volts | |
| Nominal Capacity: | ||
| 20 hour rate | (2000mA to 10.50 volts) | 35.0 AH |
| 10 hour rate | (3700mA to 10.50 volts) | 32.0 AH |
| 5 hour rate | (6600mA to 10.20 volts) | 28.0 AH |
| 1 hour rate | (24A to 9.00 volts) | 20.0 AH |
| Energy Density (20 hour rate) | 1.42 Watt-hours/cubic inch | 86 Watt-hours/l |
| Specific Energy (20 hour rate) | 15.7 Watt-hours/pound | 33 Watt-hours/kg |
| Internal Resistance (Fully Charged Battery) | 16 milliohms (approx.) | |
|
|
ChargingCycle Applications: Limit initial current to 8000mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 350mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage."Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. |
| products list | ||
|
Design by Sam Technology Co., Ltd.
|
||